Sigracet 28 BC
Fuel Cell / Electrochemical Research Material
제품 안내
Sigracet 28 BC is a non-woven carbon paper with a Microporous Layer (MPL) that has been PTFE treated to 5 wt%. It has a total thickness of 235 um (microns). The hydrophobic treatment produces water repellent properties which prevent the highly porous carbon fiber backings from flooding and actively support the water management of PEM fuel cells. SGL 28 BC is a great low-cost alternative to conventional woven carbon paper Gas Diffusion Layer (GDL) materials. The Sigracet Carbon Fiber Paper 28 Series is intended to combine the required production robustness and the excellent performance properties. Stack developers and assemblers are benefiting from the following greatly improved characteristics: Greatly improved homogeneity inter-lot and intra-lot. The overall variability has been shown to be better than +/- 10% (2 sigma) Greatly improved surface flatness Greatly reduced occurrence of...
본 제품은 연료전지, 수전해, 전기화학 및 에너지 소재 연구 분야에서 활용되는 전문 연구용 소재입니다. 제품별 상세 사양, 재고 현황 및 적용 가능 여부는 문의 후 확인 가능합니다.
Specifications
| Other Plate Properties |
|---|
| Material Type | Carbon Fiber Paper |
|---|
| Thickness | 235 microns +/- 25 microns |
|---|
| Areal Weight | 105 +/- 10 g/m² |
|---|
| Bending Stiffness (MD/TD) | 1.7 / 1.2 N mm |
|---|
| Gas Permeability | 4.5 Gurley sec |
|---|
| Compressibility | ca. 11% (at 1 MPa) |
|---|
| Electrical Resistivity (through plane) | < 11 mΩcm² (milliohms cm²) |
|---|
| Water Contact Angle (MPL) | > 130° |
|---|
| Roughness (MPL side) | 6.4 µm |
|---|
| Impurities (Fe, Co, Ni) | < 10 ppm |
|---|
| Tensile Strength | 6.6 / 5.1 MPa (MD/TD) |
|---|
| Substrate PTFE Treatment | 5% |
|---|
| Microporous Layer | Yes, on one side |
|---|
| Thermal Conductivity | 0.38 W(m^-1)(K^-1) |
|---|
0
