CT GDS310
Fuel Cell / Electrochemical Research Material
제품 안내
CT GDS310 is a carbon paper without a Microporous Layer (MPL). It has a total thickness of 310 um (microns). CT is a great low-cost alternative to conventional carbon paper Gas Diffusion Layer (GDL) materials. CT GDS310 is available in 20 x 20 cm or 40 x 40 cm sheets at this time. Advantages of CT Carbon Paper: Heat transfer during cell operation Automated QC inspection system Keep some water on the surface for conductivity Avoid “flooding” CT Fuel Cell Carbon Paper Comparison Table Scientific Literature Relevant to This Product: An article by Duong et al. entitled "Improving the Immobilization of Glucose Oxidase on Carbon Cloth Via a Hybrid Approach of Cross-Linked Chitosan/TPP Matrices with Na Polymers for High-Performance Self-Pumping Enzyme-Based Biofuel Cells" describes the use of CeTech's carbon cloth based GDL for glucose oxidation immobilization and its use in enzymatic bio-fuel...
본 제품은 연료전지, 수전해, 전기화학 및 에너지 소재 연구 분야에서 활용되는 전문 연구용 소재입니다. 제품별 상세 사양, 재고 현황 및 적용 가능 여부는 문의 후 확인 가능합니다.
Specifications
| Gas Diffusion Layer Properties |
|---|
| Material Type | Carbon Fiber Paper |
|---|
| Thickness | 0.31 mm (310 microns) |
|---|
| Basic Weight (g/m²) | 80 |
|---|
| Air Permeability (s) | < 10 |
|---|
| Porosity (%) | 77 % |
|---|
| Electrical Resistivity (through plane) | < 5 mΩcm² |
|---|
| Tensile Strength | MD: 20 N/cm and XD: 10 N/cm |
|---|
| Flexural Modulus (MPa) | MD: 3500 MPa and XD: 2000 MPa |
|---|
| Substrate PTFE Treatment | No |
|---|
| Microporous Layer | No |
|---|
0
