Sigracet 39 BC
Fuel Cell / Electrochemical Research Material
제품 안내
This product has been discontinued and we are completely out of stock. Sigracet 39 BC was discontinued and permanently replaced by Sigracet 39 BB. Sigracet 39BC is a non-woven carbon paper gas diffusion media with a Microporous Layer (MPL) that has been PTFE treated to 5%. It has a total thickness of 325 um (microns). SGL 39 BC is a great low-cost alternative to conventional woven carbon paper Gas Diffusion Layer (GDL) materials. The Sigracet Carbon Fiber Paper 39 Series is intended to combine the required production robustness and the excellent performance properties. Stack developers and assemblers are benefiting from the following greatly improved characteristics: Greatly improved homogeneity inter-lot and intra-lot. The overall variability has been shown to be better than +/- 10% (2 sigma) Greatly improved surface flatness Greatly reduced occurrence of faulty spots on a roll Best...
본 제품은 연료전지, 수전해, 전기화학 및 에너지 소재 연구 분야에서 활용되는 전문 연구용 소재입니다. 제품별 상세 사양, 재고 현황 및 적용 가능 여부는 문의 후 확인 가능합니다.
Specifications
| Gas Diffusion Layer Properties |
|---|
| Material Type | Carbon Fiber Paper |
|---|
| Thickness | 325 microns +/- 25 microns |
|---|
| Basic Weight (g/m²) | 105 +/- 10 |
|---|
| Air Permeability (s) | 1.50 +/- 1.00 cm3/(cm²*s) |
|---|
| Porosity (%) | 80% |
|---|
| Compressibility | ca. 21% (at 1 MPa) |
|---|
| Electrical Resistivity (through plane) | < 12 mΩcm² (milliohms cm²) |
|---|
| IP Pressure Drop | 0.4 bar (at 1 MPa) |
|---|
| Ash Content | < 0.25% |
|---|
| Substrate PTFE Treatment | 5% |
|---|
| Microporous Layer | Yes, on one side |
|---|